|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
COMMERCIAL LASERS High-Power 10 W 9xx nm Fiber-Coupled Diode Laser 6398-L4 Series Key Features * 10 W output power * High reliability * 105 m aperture * 0.22 or 0.15 NA Applications * Fiber laser pumping * Material processing * Graphic arts * Medical * Remote power generation * Pyrotechnic ignition JDSU 6398-L4 series diode lasers offer 10 W of power from a 105 m fiber. The L4 is a revolutionary platform based on a long history of existing fiber-coupled L2 and L3 packages, incorporating a highly reliable design into a scalable commercial product. L4 multimode pump modules offer high brightness, a small footprint and simplified thermal management by distributing the diodes (heat sources), allowing the use of either air- or water-cooled architectures with predictable high reliability. By leveraging existing manufacturing facilities around the world, JDSU is able to offer all necessary attributes in a cost-effective solution that is ideal for the laser pumping market. NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com 6398-L4 SERIES 2 Dimensions Diagram (Specifications in mm unless otherwise noted.) 2x 4.3 2X O 2.5 11.9 A 2x O 1 13 17 7.5 B Strain relief boot Metal case 31 10 8.5 (3.9 ) 1.5 3.9 2.54 7.7 Pinout Pin A B Description Laser cathode (-) Laser anode (+) 6398-L4 SERIES 3 Specifications for 0.22NA1 Parameter Laser Characteristics CW output power Mean wavelength2 Symbol Minimum Typical Maximum Spectral width (FWHM) Slope efficiency Conversion efficiency Threshold current Operating current Forward voltage Series resistance Recommended case temperature Wavelength tuning vs. temperature3 Wavelength tuning vs. output power Fiber Characteristics Fiber core diameter Fiber numerical aperture Fiber cladding Fiber buffer Fiber length Absolute Maximum Ratings Operating current Reverse voltage Case operating temperature4 Storage temperature5 Lead soldering temperature, 10 s max Relative humidity, non-condensing, ambient <45C Electrostatic discharge (ESD)6 Fiber bend radius (long-term deployment)7 Fiber axial pull force, 15 seconds Fiber side pull force, 15 seconds Po p 915 nm p 940 nm p 975 nm D 915 nm D 940 nm D 975 nm Ith Iop 915 nm Iop 940 nm Iop 975 nm Vf Rs Tc /T /P dc NA dcl db lf Iop Vrvs Top Tstg Tls RH Vesd 905 nm 928 nm 963 nm - 20C 0.20 0.9 m 15C -30C 30 mm - 917 nm 939 nm 974 nm 3 nm 0.93 W/A 0.92 W/A 0.90 W/A 48% 600 mA 11.4 A 11.7 A 11.8 A 1.81 V 0.04 25C 0.35 nm/C 1.0 nm/W 105 m 0.22 125 m 250 m 1m - 10 W 928 nm 950 nm 985 nm 6 nm 850 mA 12.5 A 12.8 A 13.0 A 2.0 V 40C 0.24 14 A 2.0 V 50C 70C 300C 85% 500 V 5N 2.5 N 1. All performance data measured at 10 W, 25 C, Beginning of Life (BOL). 2. Weighted average "center of mass" spectral point at 25C at PO 3. Change in mean with case temperature over Top 4. Non-condensing, maximum 5. Non-condensing, 2000 hours 6. C = 100 pF, R = 1.5 k, human body model, shown to be not damaging to its LI characteristics or its reliability; I-V curves may change in this ESD environment 7. Minimum bend radius of 30 mm is for long-term mechanical fiber reliability; however for 0.15 NA some optical loss may occur and a minimum bend radius of 45 mm is recommended for layouts with multiple fiber coils. 6398-L4 SERIES 4 Specification for 0.15 NA1 Parameter Laser Characteristics CW output power Mean wavelength2 Symbol Minimum Typical Maximum Spectral width (FWHM) Slope efficiency Conversion efficiency Threshold current Operating current Forward voltage Series resistance Recommended case temperature Wavelength tuning vs. temperature3 Wavelength tuning vs. output power Fiber Characteristics Fiber core diameter Fiber numerical aperture Fiber cladding Fiber buffer Fiber length Absolute Maximum Ratings Operating current Reverse voltage Case operating temperature4 Storage temperature5 Lead soldering temperature, 10 s max Relative humidity, non-condensing, ambient <45C Electrostatic discharge (ESD)6 Fiber bend radius (long-term deployment)7 Fiber axial pull force, 15 seconds Fiber side pull force, 15 seconds Po p 915 nm p 940 nm p 975 nm D 915 nm D 940 nm D 975 nm Ith Iop 915 nm Iop 940 nm Iop 975 nm Vf Rs Tc /T /P dc NA dcl db lf Iop Vrvs Top Tstg Tls RH Vesd 905 nm 928 nm 963 nm - 20C 0.135 0.9 m 15C -30C 30 mm - 917 nm 939 nm 974 nm 3 nm 0.91 W/A 0.90 W/A 0.90 W/A 46% 600 mA 12.0 A 12.2 A 12.3 A 1.82 V 0.04 25C 0.35 nm/C 1.0 nm/W 105 m 0.15 125 m 250 m 1m - 10 W 928 nm 950 nm 985 nm 6 nm 850 mA 13.0 A 13.5 A 13.5 A 2.0 V 40C 0.165 14 A 2.0 V 50C 70C 300C 85% 500 V 5N 2.5 N 1. All performance data measured at 10 W, 25C, Beginning of Life (BOL). 2. Weighted average "center of mass" spectral point at 25C at PO 3. Change in mean with case temperature over Top 4. Non-condensing, maximum 5. Non-condensing, 2000 hours 6. C = 100 pF, R = 1.5 k, human body model, shown to be not damaging to its LI characteristics or its reliability; I-V curves may change in this ESD environment 7. Minimum bend radius of 30 mm is for long-term mechanical fiber reliability; however for 0.15 NA some optical loss may occur and a minimum bend radius of 45 mm is recommended for layouts with multiple fiber coils. 6398-L4 SERIES 5 Configurations Product Code L4-9891510-100B L4-9891510-100C L4-9891510-100M L4-9894010-100B L4-9894010-100C L4-9894010-100M L4-9897510-100B L4-9897510-100C L4-9897510-100M Wavelength Range 905-928 nm 905-928 nm 905-928 nm 928-950 nm 928-950 nm 928-950 nm 963-985 nm 963-985 nm 963-985 nm Connector1 No No SMA No No SMA No No SMA Fiber NA 0.22 0.15 0.22 0.22 0.15 0.22 0.22 0.15 0.22 1. If a connector option is selected, it is always connectorized. All performance data measured at 10 W, 25C, Beginning of Life. Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: L4-9891510-100B 6398-L4 SERIES User Safety Safety and Operating Considerations The laser light emitted from this diode laser is invisible and may be harmful to the human eye. Avoid looking directly into the diode laser or into the collimated beam along its optical axis when the device is in operation. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD. Operating the diode laser outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the component must be employed such that the maximum peak optical power cannot be exceeded. CW diode lasers may be damaged by excessive drive current or switching transients. When power supplies are used, the diode laser should be connected with the main power on and the output voltage at zero. The current should be increased slowly while the diode laser output power and the drive current are monitored. Device degradation accelerates with increased temperature, and therefore careful attention to minimizing the case temperature is advised. For example, life expectancy will decrease by a factor of four if the case is operated at 50C rather than 25C. A proper heatsink for the diode laser on a thermal radiator will greatly enhance laser life. Firmly mount the laser on a radiator with a thermal impedance of less than 0.5C/W for increased reliability. ESD PROTECTION - Electrostatic discharge is the primary cause of unexpected diode laser failure. Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and rigorous antistatic techniques when handling diode lasers. Labeling 21 CFR 1040.10 Compliance Because of the small size of these devices, each of the labels shown is attached to the individual shipping container. They are illustrated here to comply with 21 CFR 1040.10 as applicable under the Radiation Control for Health and Safety Act of 1968. Serial Number Identification Label L4-ABC123 Model: L4-9891510-100B JDSU 3 Hongmian Road Futian Free Trade Zone Shenzhen 518038 Made in: China Output Power Danger Label DANGER INVISIBLE LASER RADIATION* AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION GaAlAs Diode CW 10 W max. CLASS IV LASER PRODUCT *SEE MANUAL 3110 NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com December 2007 Product specifications and descriptions in this document subject to change without notice. (c) 2007 JDS Uniphase Corporation 30149269 Rev. 000 12/07 6398L4.DS.CL.AE 12/05/07 Serial: L4-ABC123 |
Price & Availability of L4-9891510-100B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |